CrystalGel is a styrene resin, providing the greatest adhesion power of any non-oil based product. Among the soft surfaces to which CrystalGel will adhere are styrofoam, ethafoam and, of course, muslin and fabrics. Among the more rigid surfaces to which CrystalGel will adhere are metals, glass, plastics, wood, Luan and fiberboard. It is particularly effective in adhering to plexiglass without hardening off.
Drying Time: Varies with thickness of coating, but usually dries to the touch between one and eight hours. Allow 24 hours for complete cure.
Coverage: Varies with application method; approximately 250 square feet per gallon.
Clean-Up: Easy clean up with soap and water. Be sure to clean before CrystalGel completely dries. Once dried, clean up is more difficult.
Application: Apply by brush, roller, pastry tube, trowel, tongue depressor or any other convenient means. CrystalGel has the consistency of hair gel. It may be thinned with water for a more liquid consistency.
Surface Preparation: All surfaces should be clean, dry and dust-free before application.
Shelf Life: Minimum 12 months
Cautions: Do not apply when surface or air temperature is below 50°F (10°C). Protect unused product against freezing. CrystalGel will freeze and become unusable at temperatures below 32°F (0°C). Do not take internally. Use with adequate ventilation. Keep out of the reach of children.